Quantum correlations at negative absolute temperatures

We study behavior of quantum discord, a kind of quantum correlation, in systems of dipole–dipole interacting spins in an external magnetic field in the whole temperature range ( \(-\infty ). It was shown that negative temperatures, which are introduced to describe inversions in the population in a finite level system, provide more favorable conditions for emergence of quantum correlations including entanglement. We show that at negative temperature, the correlations become more intense and discord exists between remote spins being in separated states.     

Designing for reportability: sustainable gamification,public engagement,and promoting environmental debate

There is a growing emphasis in many countries on matters such as participation in e-government, e-democracy, the provision of forums for online debate, and so on. A critical issue in all of these cases is one of encouraging engagement across a broad spectrum of potentially interested parties and stakeholders. In this paper, we use an ethnographic study of an online event, designed to encourage debate, to explore some critical issues in how the mechanisms productive of debate have shifted in company with the Web 2.0 phenomenon. By contrasting this with a prior study of how players managed their gameplay in a multiplayer pervasive game, we focus upon how different ways of constructing games and events can have serious implications for their ordinary everyday reportability in routine face-to-face interactions. We conclude that designing for reportability should be an active consideration when designing the resources for online debate and consider some ways in which that might be accomplished.     

A novel synthesis method for the preparation of aromatic poly(imide benzoxazole) from trimellitic anhydride chloride and bis(o‐aminophenol)

A poly(imide benzoxazole) was prepared directly from trimellitic anhydride chloride and 2,2‐bis(3‐amino‐4‐hydroxyphenyl)hexafluoropropane (BisAPAF) monomers in a two‐step method. In the first step, a poly(hydroxyamide amic acid) precursor was synthesized by the low‐temperature solution polymerization in an organic solvent. Subsequently, thermal cyclodehydration of the poly(hydroxyamide amic acid) precursor at 350°C produced the corresponding poly(imide benzoxazole). The inherent viscosity of the precursor polymer was 0.22 dL/g. The cyclized poly(imide benzoxazole) showed a glass transition temperature (T_g) at 329°C and a 5% weight loss temperature at 530°C in nitrogen and at 525°C in air. The poly(imide benzoxazole) is amorphous as evidenced by the wide‐angle X‐ray diffraction measurement. The structures of the precursor polymer and the fully cyclized polymer were characterized by Fourier transform infrared (FTIR) and proton nuclear magnetic resonance spectroscopy (¹H NMR). © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 88: 2388–2391, 2003     

The Failure of the Strong Pumping Lemma for Multiple Context-Free Languages

Seki et al. (Theor. Comput. Sci. 88(2):191–229, 1991) showed that every m-multiple context-free language L is weakly 2m-iterative in the sense that either L is finite or L contains a subset of the form \(\{ u_{0} w_{1}^{i} u_{1} \cdots w_{2m}^{i} u_{2m} \mid i \in \mathbb {N}\}\) , where w ₁?w _2n ≠ε. Whether every m-multiple context-free language L is 2m-iterative, that is to say, whether all but finitely many elements z of L can be written as z=u ₀ w ₁ u ₁?w _2m u _2m with w ₁?w _2m ≠ε and \(\{ u_{0} w_{1}^{i} u_{1} \cdots w_{2m}^{i} u_{2m} \mid i \in \mathbb {N}\} \subseteq L\) , has been open. We show that there is a 3-multiple context-free language that is not k-iterative for any k.     

Decreasing the Sampling Time Interval in Radioactive Particle Tracking

The study of the movement of solids in multiphase reactors using radioactive particle tracking is currently limited to fairly modest particle velocities because of count‐rate limitations of the detection system. In this work, this restriction was overcome by increasing the activity of the radioactive tracer, by decreasing the sampling time interval and by modifying the particle tracking software to recognize which detectors were saturated and to use only the data from the remaining unsaturated detectors. Higher tracer activity resulted in lower standard deviation of the calculated tracer coordinates.     

Invited article: Digital beam-forming imaging riometer systems

The design and operation of a new generation of digital imaging riometer systems developed by Lancaster University are presented. In the heart of the digital imaging riometer is a field-programmable gate array (FPGA), which is used for the digital signal processing and digital beam forming, completely replacing the analog Butler matrices which have been used in previous designs. The reconfigurable nature of the FPGA has been exploited to produce tools for remote system testing and diagnosis which have proven extremely useful for operation in remote locations such as the Arctic and Antarctic. Different FPGA programs enable different instrument configurations, including a 4 × 4 antenna filled array (producing 4 × 4 beams), an 8 × 8 antenna filled array (producing 7 × 7 beams), and a Mills cross system utilizing 63 antennas producing 556 usable beams. The concept of using a Mills cross antenna array for riometry has been successfully demonstrated for the first time. The digital beam forming has been validated by comparing the received signal power from cosmic radio sources with results predicted from the theoretical beam radiation pattern. The performances of four digital imaging riometer systems are compared against each other and a traditional imaging riometer utilizing analog Butler matrices. The comparison shows that digital imaging riometer systems, with independent receivers for each antenna, can obtain much better measurement precision for filled arrays or much higher spatial resolution for the Mills cross configuration when compared to existing imaging riometer systems.     

In-situ TEM on (de)hydrogenation of Pd at 0.5-4.5 bar hydrogen pressure and 20-400°C

We have developed a nanoreactor, sample holder and gas system for in-situ transmission electron microscopy (TEM) of hydrogen storage materials up to at least 4.5 bar. The MEMS-based nanoreactor has a microheater, two electron-transparent windows and a gas inlet and outlet. The holder contains various O-rings to have leak-tight connections with the nanoreactor. The system was tested with the (de)hydrogenation of Pd at pressures up to 4.5 bar. The Pd film consisted of islands being 15 nm thick and 50-500 nm wide. In electron diffraction mode we observed reproducibly a crystal lattice expansion and shrinkage owing to hydrogenation and dehydrogenation, respectively. In selected-area electron diffraction and bright/dark-field modes the (de)hydrogenation of individual Pd particles was followed. Some Pd islands are consistently hydrogenated faster than others. When thermally cycled, thermal hysteresis of about 10-16 °C between hydrogen absorption and desorption was observed for hydrogen pressures of 0.5-4.5 bar. Experiments at 0.8 bar and 3.2 bar showed that the (de)hydrogenation temperature is not affected by the electron beam. This result shows that this is a fast method to investigate hydrogen storage materials with information at the nanometer scale.     

A non-contact method for detecting on-line industrial robot position errors using a microwave Doppler radar motion detector

To be useful, industrial robots must meet positioning accuracy requirements for their given applications. Off-line calibration generally improves robot positioning accuracy to levels needed for open-loop use in most industrial applications. Applications that require greater accuracy with respect to external assemblies generally turn to closed-loop control or passive compliance. However, industrial robot systems do not generally monitor in-process robot position to detect machine faults that can lead to product faults, scrap, machine damage, and additional costs. To achieve greater operational efficiencies, new non-invasive, non-contact methods for monitoring robot position are needed. The investigators developed a low-cost method for in-process industrial robot position monitoring using a Doppler motion detector and a statistical position error measure. The method detects position errors at robot repeatability levels.     

A method for detecting tool wear on a CNC lathe using a doppler radar detector

Installing a non-contact in-process tool wear detection system on a computer numerical control lathe can help prevent product defects and improve product quality without impacting product cycle time. Many methods have been proposed for non-contact in-process tool wear detection. In particular, a recent international patent application describes a method for measuring the torque in a rotating axle using a high-frequency wireless transmitter/receiver and a vibrating string. The method has reportedly been used to detect cutting on a manual lathe. The authors present a new method for measuring tool wear using a high-frequency wireless transmitter/receiver alone, without a vibrating string. The high-frequency transmitter/receiver apparently responds to metal-metal contact noise rather than, or more strongly than, to signals generated by a vibrating string. The findings could help bring automated tool wear monitoring systems closer to the level of performance needed for practical use in industry.     

A system and methodologies for absolute quantum efficiency measurements from the vacuum ultraviolet through the near infrared

In this paper we present our system design and methodology for making absolute quantum efficiency (QE) measurements through the vacuum ultraviolet (VUV) and verify the system with delta-doped silicon CCDs. Delta-doped detectors provide an excellent platform to validate measurements through the VUV due to their enhanced UV response. The requirements for measuring QE through the VUV are more strenuous than measurements in the near UV and necessitate, among other things, the use of a vacuum monochromator, good dewar chamber vacuum to prevent on-chip condensation, and more stringent handling requirements.